Features
Low Cost Single Axis Accelerometer (SQI608A11-3F)
- Low-cost, general purpose, industrial ceramic shear ICP accel, 100mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable
- Sensitivity: ( ±15%) 100 mV/g (10.2 mV/(m/s²))
- Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
- Measurement Range: ±50 g (±490 m/s²)
- Mounting: Stud
- Electrical Connector: 10′ long cable to BNC connector
- Also comes in 4 pack and 8 pack
- Come with 3′ long cable with transducer to BNC connector and 7′ BNC-BNC extension cable
Low Cost Single Axis Accelerometer (SQI608A11-10F)
- Low-cost, general purpose, industrial ceramic shear ICP accel, 100mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable
- Sensitivity: ( ±15%) 100 mV/g (10.2 mV/(m/s²))
- Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
- Measurement Range: ±50 g (±490 m/s²)
- Mounting: Stud
- Electrical Connector: 10′ long cable to BNC connector
- Also comes in 4 pack and 8 pack
- Come with 10′ long cable with BNC connector
Tri-Axis Accelerometer (SQI604B31)
- Triaxial ring-style, industrial, ceramic shear ICP accel, 100 mV/g, 0.5 to 5k Hz, side exit, 4-pin conn.
- Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
- Frequency Range: (±3dB) 30 to 300000 cpm (0.5 to 5000 Hz)
- Measurement Range: ±50 g (±490 m/s²)
- Mounting: Through Hole
- Electrical Connector: 4-Pin MIL-C-26482 and 10′ long cable to three BNC connectors
Accelerometer Mounting Kit (M-AMK)
- Attach your accelerometer (¼ – 28 thread) to your machinery
- The kit consists of 6 disks, 2 magnets and adhesives
Triaxial accelerometer mounting block (M-TAMB)
- Convenient, inexpensive, triaxial measurements. It provides a means to secure three transducers (¼ – 28 thread) in an X-Y-Z configuration in a compact arrangement.
- The kit consists of one triaxial mounting block
