Features
Eddy Current Proximity Probe (SQPPC)
- Probe diameter: 6 mm
- Thread length 2-inch (with probe tip)
- Probe length: 0.5 m
- Extension cable length: 4.5 m
- Probe-extension connector: L6
- Each signal conditioner takes two (2) probes.
- Signal conditioner output: BNC (female)
- Power supply: 110 V – 60 Hz/ 220 V-50 Hz
- Voltage output : 0 ~ -10 V
- Linear range: 0 ~ 2 mm
- Non-linearity error: <2%
- Sensitivity: 4.5 mV/ µm (nominal)
- Resolution: 1 µm
- Frequency response: 0 ~ 5kHz, ± 3 dB
- Temperature range: -30 ~ 120 °C for probe, 0 ~ 65 °C for signal conditioner
- This kit consists of one 5mm proximity probe, one extension cable, one signal conditioner, and one power supply.
- Comes in 2 pack and 4 pack
5 mm 1/4 28 Proximity Probe Mounting Kit (M-PPMK)
- Avoids the magnetic field interference commonly encountered in small diameter shafts.
- AIPE standard proximity probes, eddy current sensors, LVDT’s, may be mounted both vertically and horizontally.
- Adjustable in the axial direction for measurements at various locations along the rotor shaft.
- This kit consists of one bracket assembly.
