PCB Accessories

Milling Bit

Milling bit with 60° tip angle	For making channel widths of 4 – 8 mil (0.1 – 0.2 mm)
Milling bit with 90° tip angle	For making channel widths of 8 – 20 mil (0.2 – 0.5 mm)
Milling bit with 120° tip angle	For making channel widths of 16 mil (0.4 mm) or more
Diamond milling bit (90°)	About 30 times longer lifespan

HF Milling Bit

High-Frequency (HF) Milling Bit (Radio-Frequency (RF) Milling Bit)

4mil ( 0.1mm) or less 6mil ( 0.15mm)	Since this size breaks easily, we recommend using it on boards with copper plating of 18µm or less in thickness and a spindle motor speed higher than 50,000 rpm, and milling speed slower.
8mil (0.2mm)	Wherever possible, use this size on boards with copper plating of 18 µm or less in thickness and at slower than normal milling speeds.
12mil (0.3mm)	Wherever possible, use this size on boards with copper plating of 18 µm or less in thickness.
20mil ( 0.5mm)	This size can be used under normal operating conditions.

Advantages

Good high-frequency characteristics
Channel width does not change with milling depth

Disadvantage

Thin cutters break easily

Drilling Bit

Drilling Bit (For making holes)

0.02″, 0.078″ – 0.59″ (0.05, 0.2 – 1.5mm)	We have these sizes in 0.1 mm increments in stock.
0.33″ ( 0.85mm)	In stock
0.63″ – 1/8″ (1.6 – 3.175mm)	We have these sizes in 0.2 mm increments in stock.

Routing Bit (For making external and internal shapes)

Sizes 1.0, 2.0, and 3.0 mm.

Aluminium Bit (For making external and internal shapes)

Especially suited for making external shapes of Teflon boards.
Sizes 0.8, 1.0, 2.0, and 3.0 mm.

Ring Setter

Ring Setter (simplified model) Base

With this ring setter, a ring is installed to a tool by hitting with a hammer.

Ring setter (simplified model) Base enables you to attach the ring on the tools precisely in the same position.

Features

You can attach or detach the ring to the tools.
Standardize the depth of the tools for the auto tool
change machine.
Effective in adjusting to the material of varied thickness.
Available for the tools thinner than 0.1mm (4mil)

Products