# MITS Solutions Asia ## Posts - [Acoustic Commission Testing](https://mitssolutions.asia/acoustic-commission-testing/): We offer acoustic commissioning testing to verify internal and/or external sound levels at a development or industrial plant after construction and commissioning to meet noise criteria set during planning stages.   This is an independent report. We will compare the independent report to noise criteria set and work with project owners, architects, developers, contractors, engineering companies, engineering department, HSE department, and/or occupants to meet noise criteria. - [Predictive Maintenance and Fault Detection Solutions for Transformer, Rotating Machines, and Power Electronics](https://mitssolutions.asia/predictive-maintenance-and-fault-detection-solutions-for-transformer-rotating-machines-and-power-electronics/): We offer predictive maintenance solutions as part of our asset management and reliability services to solar farms, battery storage systems, wind turbines, petrochemical plants, oil and gas platforms, food and beverage plants, mining industry, and other industry plants to predict when and where potential breakdowns in equipment could occur and move to respond to them in order to prevent potential failures which may cost a lot to repair, unscheduled downtime or shutdown, fewer redundant inspections, and ineffective preventive maintenance measures using condition-based maintenance or condition-based monitoring as one of our approaches in predictive maintenance   Predictive maintenance (PdM) is a... - [Room Acoustics](https://mitssolutions.asia/room-acoustics/): Commercial Studio Soundproofing Recording Studio Soundproofing Home Theatre Soundproofing - [Identification of Sound Leakage using Sound Localisation](https://mitssolutions.asia/identification-of-sound-leakage-using-sound-localisation/): Sound leakage from window, ceiling, or door - [Acoustic/Sound Transmission Suite (Laboratory) & Reverberation Room (Laboratory)](https://mitssolutions.asia/acoustic-sound-transmission-suite-laboratory-reverberation-room-laboratory/): We can set-up a sound transmission suite and reverberation rooms or chambers for your Sound Insulation Testing and Sound Absorption Testing.   Sound Insulation Testing A test to measure the resistance to sound provided by a building element such as a separating wall, window, partition, or floor, that is, restriction of sound travelling between separate spaces or rooms through walls, floor, and ceilings. The sound reduction index of a building element is an important quantity in noise abatement. It is determined in sound transmission suite.  Laboratory airborne sound insulation (weighted sound reduction index, or sound transmission loss (sound transmission class,... - [Anechoic Chamber](https://mitssolutions.asia/anechoic-chamber/): Anechoic is defined as “free from echoes or reverberations”. An ideal anechoic chamber would contain no reflections of sound from its walls, ceiling, or floor and existence of an acoustical free-field condition. Temperature, pressure, humidity, and wind in an anechoic chamber must be taken account as these parameters could create significantly and unpredictably disturbance to the uniform radiation of sound waves. The inverse square law would function perfectly in an ideal free-field environment. This indicates that the sound pressure level from a sound source would decrease six decibels for each doubling of distance from the source. To set-up an anechoic... - [Acoustic/Sound Calibration Laboratory](https://mitssolutions.asia/acoustic-calibration-laboratory-sound-calibration-laboratory/): We offer equipment for set-up of acoustic or sound calibration laboratory that complies with relevant standards.   What is calibration? Calibration refers to assessing the accuracy of a measurement device by comparing it to a standard of known accuracy.  It is defined as “the documented comparison of the measurement device to be calibrated against a traceable device” (that is, a reference standard).   How confident are we calibration is accurate? The standard are used in the calibration process has been periodically calibrated using another standard which eventually can be traced directly to a standard maintained by a National Metrology Institute.... - [Impact Sound Insulation Assessment (Field)](https://mitssolutions.asia/impact-sound-insulation-assessment-field/): We offer impact sound insulation assessment.  This test measures the impact noise from a room above with a tapping machine to simulate sound such as footfall and general banging / knocking. This test is only carried out where one residence, room or living quarter (or a portion thereof) is directly above another.  An Impact test is carried out using a Class 1 Sound Level Meter and an Impact Machine (also known as a Tapping machine).   Some standards that we use are ISO 16283-2:2020 Acoustics — Field measurement of sound insulation in buildings and of building elements — Part 2:... - [Airborne Sound Insulation Assessment (Field)](https://mitssolutions.asia/airborne-sound-insulation-assessment-field/): We offer airborne sound insulation assessment where we reproduce audible airborne sound that could be transmitted from one residence, room or living quarters to another.  Airborne sound insulation describes the insulation, between rooms separated by a wall or floor partition, of sound transmitted through air.  The assessment results can be used to quantify, assess and compare the airborne sound insulation in unfurnished or furnished rooms. The measured airborne sound insulation is converted into a single number, the sound reduction index (SRI), to characterise the resistance to the passage of airborne sound between rooms.   Some standards that we use are... - [Boundary Noise Monitoring](https://mitssolutions.asia/boundary-noise-monitoring/): Boundary noise monitoring involves measuring and monitoring noise levels in the vicinity of a boundary, such as between different properties such as industrial and residential or near a construction site. It is done to ensure compliance with noise regulations and to assess the potential impact of noise on nearby residents or sensitive receptors. Noise monitoring stations are be placed at different locations around the boundary to get a comprehensive understanding of noise levels. Continuous monitoring is often carried out over a specified period, typically 24 hours, to capture variations in noise levels throughout the day and night. The data collected... - [Identification of Noise Sources with Sound Localisation](https://mitssolutions.asia/identification-of-noise-sources-with-sound-localisation/): We offer sound localisation using acoustic camera with beamforming technology. Now you no longer hear but see sound. With this technology, we can almost immediately pinpoint the locations of noise sources and offer a noise control engineering measures if applicable. The sound localisation could be applied to factories, plants, mining, oil and gas platforms, pass by trains, automotive industries, loudspeaker testing, HVAC, research and development, electrical appliances, product design, aircraft, wind turbine, sound leakage, pumps, compressor, gas turbine, and others.   Strip Mining Excavator Sound Localisation https://www.gfaitech.com/applications/stripe-mining-excavator - [Noise Control Engineering](https://mitssolutions.asia/noise-control-engineering/): We employ various techniques and technologies in the field of noise control engineering that focuses on reducing or eliminating noise and vibrations in various environments. It involves the design and implementation of measures to control and mitigate noise pollution caused by industrial processes, transportation systems, construction sites, building services and other sources by using sound barriers and enclosures, soundproofing materials, vibration damping techniques, and acoustic design principles.   The ultimate objective of noise control engineering: to create a quieter and more comfortable environment for people, reduce the risk of hearing damage reduce other health issues associated with prolonged exposure to... - [Workplace Noise Assessment, Occupational Noise Assessment, Noise Risk Assessment](https://mitssolutions.asia/workplace-noise-assessment-occupational-noise-assessment-noise-risk-assessment/): We offer noise risk assessment at workplaces, not limited to only factories and plants but any workplaces exposed to high level of noise exposure, intermittent noise, impulse noise, and/or tonal noise. The aim of the risk assessment is to help employer decide what they need to do to ensure the health and safety of employees who are exposed to noise and to avoid fines from authorities. The DOSH MY reported a total of 5,101 cases of hearing problems due to occupational noise from January to June 2023. They recorded 8997 cases of Noise Induced Hearing Loss and confirmed 5699 out... - [Environmental Noise Impact Assessment](https://mitssolutions.asia/environmental-noise-impact-assessment/): We offer environmental noise impact assessments for new developments: by understanding the context of the project and development, identify relevant international, regional, national, and local government policies and standards on requirements on sound and noise emission limits, identify the sources of noise and assess its intensity, identify sensitive receptors and determine potential impacts of noise on both human and ecological receptors propose noise control engineering measures Early involvement in a project provides the opportunity to influence the design of the project and potentially eliminate or reduce the noise impact. This could result in overall cost and time savings to the... ## Pages - [Events & News](https://mitssolutions.asia/events-news/): Exhibitions. Conferences. Trainings. Workshops. Webinars. Events & News Opportunities to be exposed to new ideas and concepts which can be implemented into our work, research, and lives. It may change the outlook on a topic or shed light on subject areas or ideas (directly or indirectly) that has beginning to struggle. All Trainings-WorkshopsExhibitions-Conferences2023202220212019 ExhibitionVIETNAM INDUSTRIAL & MANUFACTURING FAIR 202308 – 10 November 2023Hanoi, Vietnam Workshop Condition-based Predictive Maintenance4 May 2023 In-Person Workshop Surabaya, Indonesia Workshop Noise Immission Control 1 – 2 March 2023 In-Person Worshop Kuala Lumpur, Malaysia Workshop Vibration & Shock Test 27 – 28 February 2023 In-Person Workshop... - [About Us](https://mitssolutions.asia/about-us/): MITS ASIA ORGANISED FOR THE FUTURE With a lean and dynamic team, we are a progressive engineering, consulting, and solutions providing company. WE TRANSFORM INSIGHTS INTO VERSATILE AND ACHIEVABLE SOLUTIONS ‌Consolidating integrity, creativity, experience, and expertise ‌‌to achieve practical and exquisite solutions ‌that matter to our valued customers. OUR VALUED CUSTOMERS We examine their requirements by stepping into their shoes, with insights, curiosity, and passion to establish respectable solutions for them. ‌ ‌‌ ‌‌We use different expertise and knowledge across the communities to produce quality and professionalism in our work. ‌ ‌ ‌‌The culture of co-operation, inclusivity, diversity, and equality... - [Knowledge](https://mitssolutions.asia/knowledge/): EXPERTISE. INSIGHTS.LEARNING. Knowledge By learning, we make sense of the world surrounding us, the world within us, and where we fit within the world. All PublicationsBlogArticles20242023202220212019 let’s talk Contact us . Let’s Connect EXPERTISE. INSIGHTS.LEARNING. KNOWLEDGE By learning, we make sense of the world surrounding us, the world within us, and where we fit within the world. - [Brands](https://mitssolutions.asia/brands/): What we offer Brands We work with some of the largest brands from across the earth and at some of the massive and most prestigious industry events around. We have immense experience of co-operating with a wide range of cross-sector companies and have done significant work. Explore Our Brands https://mitssolutions.asia/wp-content/uploads/2023/08/Can.mp4 let’s talk Contact us . Let’s Connect We work with some of the largest brands from across the earth and at some of the massive and most prestigious industry events around. We have immense experience of co-operating with a wide range of cross-sector companies and have done significant work. Brands... - [What We Do](https://mitssolutions.asia/services/): ADVANCED. Sophisticated. Simplicity. What We Do We deliver effective projects. Noise Consultation Noise Consultation Environmental Noise Impact Assessment, Workplace Noise Impact Assessment, Noise Control Engineering, Identification of Noise Sources with Sound Localisation, Boundary Noise Monitoring, Acoustic Commission Testing View More ‌Vibration Monitoring ‌Vibration Monitoring luctus massa ipsum at tempus eleifend congue lectus bibendum porttito praesent elit sapien venenatis nec urna vitae View More Acoustic Consultation Acoustic Consultation Airborne Sound Insulation Assessment (Field), Impact Sound Insulation Assessment (Field), Acoustic/Sound Calibration Laboratory, Anechoic Chamber, Acoustic/Sound Transmission Suite (Laboratory) & Reverberation Room (Laboratory), Identification of Sound Leakage using Sound Localisation, Room Acoustics View... - [Contact Us](https://mitssolutions.asia/contact-us/): Do not hesitate to consult us for any project or solution, or talk about an idea. Let’s connect. Contact Us Let’s Connect Let’s Talk. info@mitssolutions.asia WhatsApp. +6012.6945.333 Visit Us. Malaysia D-20-06, Sunway Nexis, Kota Damansara, 47810 Petaling Jaya, Selangor, Malaysia.+603.7611.7676 Vietnam 8TH FLOOR, 01 Dao Duy Anh Ocean Park Building, Phuong Mai, Dong Da, HANOI.+8491.228.7676 - [Products](https://mitssolutions.asia/products/) - [MITS](https://mitssolutions.asia/mits/) - [Home](https://mitssolutions.asia/): Engineering Consultancy Solutions Provider ABOUT US We convert insights into concept, concept into experience, experience into connections between industries, business and people, and connections into achievable solution. We never underestimate any parts of each project as they’re all essential to meeting the ultimate goal. You will be engaged in with our positive and enthusiastic attitude. Read More Our Business Structure into three business segments ENGINEERING Comprehensive range of engineering services that require close cooperation between numerous disciplines to deliver a project that is managed within scope, timeline, quality and cost. Safety and sustainability are our priority. CONSULTANCY Deliver legislative, advise,... ## Products - [WidePIX CHROMATIC SenseEdge](https://mitssolutions.asia/products/advacam/imaging-camera/widepix/widepix-chromatic-senseedge/):   The WidePIX CHROMATIC SenseEdge multi-chip industrial scanner and imaging detector introduces edge-sensing solution, where the sensitive area reaches the very edge of the detector with no borders. This unique design allows measurements to be taken directly next to the inspected sample, removing barriers and enabling detailed inspections of complex or irregular shapes. Beyond this innovation, WidePIX CHROMATIC series delivers advanced functionality for spectral, material-sensitive “color radiography” and is fully suitable for CT scanners, supporting a hardware-based Time-Delayed-Integration (TDI) mode. Its core is based on Medipix3 hybrid detector technology with silicon or CdTe sensors. - [WidePIX CHROMATIC Industry](https://mitssolutions.asia/products/advacam/imaging-camera/widepix/widepix-chromatic-industry/):   The WidePIX CHROMATIC Industry is a multi-chip industrial scanner and imaging detector. A robust solution designed not only for advanced imaging but also for reliable industrial deployment in demanding environments. It provides spectral, material-sensitive “color radiography” and is fully suitable for CT scanners, where it supports a hardware-based Time-Delayed-Integration (TDI) mode (only for single-row configuration). At its core, the device integrates Medipix3 hybrid detector technology with either silicon or CdTe sensors. - [WidePIX CHROMATIC 25](https://mitssolutions.asia/products/advacam/imaging-camera/widepix/widepix-chromatic-25/):   Large area detector with exceptional dynamic range and an outstanding frame rate The WidePIX CHROMATIC 25 (former name WidePIX 5×5 MPX3) offers a large Medipix3 chip equipped sensitive area. The detector’s sensor surface offers 1,638,400 pixels (70x70mm) in a square array of 25 hybrid detector electronics tiles. They are attached to a CdTe sensor. It can collect up to 170 frames per second and stream data at the rate of 5 gigabits per second. All segments are fully synchronized, and the device is compatible with external triggering. - [MiniPIX MAGIC Dual](https://mitssolutions.asia/products/advacam/imaging-camera/advapix/minipix-magic-dual/):   Advanced High-Speed Spectral Imaging Camera modified for high energies The AdvaPIX MAGIC Dual combines several benefits: Electronics placed aside in sensitive areas, minimum amount of material behind sensors, which allows free path for primary X-ray beam. It uses a single USB3.0 interface providing synchronized operation of all four Timepix3 chips. This detector is a a two-chip configuration. The 28 x 14 millimeter sensitive area is rectangle shaped and offers the resolution of 131,072 pixels. Compared to the regular AdvaPIX with a single chip, this variation delivers a bigger sensitive area to collect more data in a single measurement. AdvaPIX MAGIC Dual is the world’s first photon-counting detector that operates in list data-driven mode. This means every radiation hit is recorded into a continuous data stream. The device measures each detected quanta’s position, energy, and time-of-arrival. - [MiniPIX MAGIC Quad](https://mitssolutions.asia/products/advacam/imaging-camera/advapix/minipix-magic-quad/):   Advanced High-Speed Spectral Imaging Camera modified for high energies The AdvaPIX MAGIC Quad combines several benefits: Electronics placed aside in sensitive areas, minimum amount of material behind sensors, the completely free path for primary X-ray beam passing through the (optional) hole. It uses a single USB3.0 interface providing synchronized operation of all four Timepix3 chips. AdvaPIX MAGIC Quad is the world’s first photon-counting detector that operates in list data-driven mode. This means every radiation hit is recorded into a continuous data stream. The device measures each detected quanta’s position, energy, and time-of-arrival. The detector provides ultra-fast sparse data readout able to acquire up to 47 million pixel hits per second. - [MiniPIX BASIC Flex](https://mitssolutions.asia/products/advacam/imaging-camera/minipix/minipix-basic-flex/):   The MiniPIX BASIC Flex (former name MiniPIX TPX Standard Flex) detector incorporates single Timepix detector (256 x 256 pixels with a pitch of 55 μm) with a sensor of 500 μm thick silicon. It is capable of reading up to 55 frames per second (with an exposure time of 1 ms). The Timepix detector is energy sensitive, bringing a new dimension to radiographic images. The Flex solution removes the solid housing to adapt the detector for integration into large industrial systems. It is equipped with a 500 µm Silicone sensor layer. The MiniPIX BASIC Flex detector is connected via USB interface. It is controlled in PIXet Pro software, which is provided for free. It runs on all major operating systems (MS Windows, Mac OS and LINUX). API integration into other systems is possible. - [MiniPIX SPRINTER](https://mitssolutions.asia/products/advacam/imaging-camera/minipix/minipix-sprinter/):   High-speed single-photon counting camera for versatile x-ray imaging and particle tracking The MiniPIX SPRINTER offers the highest frame rate in its category – up to 99 frames per second – combined with extremely high stability. The signal-to-noise ratio exceeding 2,000 enables crystal-clear X-ray images with noise at 0.05 % or the resulting image. Another advantage is its compact size. It measures 80 x 21 x 14 mm and weighs just 37 grams. The detector features 256 x 256 pixels with a pitch of 55 μm. The spectroscopic mode offers direct energy measurements in every pixel. The MiniPIX SPRINTER delivers the best energy resolution for XRF & XRD. - [Enging provides Electric Machines Condition Monitoring in any Industrial Process and Electric Asset](https://mitssolutions.asia/products/dynamox-enging/electrical-signature-analysis/enging-provides-electric-machines-condition-monitoring-in-any-industrial-process-and-electric-asset/): Electrical Signature Analysis. No matter its location, typology or voltage level. Exclusively using electric variables and with a non-invasive technique, Enging has the capacity to pinpoint degradations in electric assets several months before it becomes a catastrophic fault. Enging provides Electric Machines Condition Monitoring, predictive maintenance and on-line, real-time assessments in any industrial process. These solutions are exclusively based on the acquisition of electrical variables, being totally non-invasive and easy to implement. It will allow, in real time and automatically, the evaluation of the electric machines’ operating conditions. Non-invasive technology Do not need historical data Predictive maintenance systems based on electric variables acquisition Real-time and remote systems for continuous evaluation of the electric machines’ status Electric Machines monitoring without interruption of its operation and the presence of external collaborators in the installation perimeter Early detection of faults in the main components of these electric machines, before it becomes catastrophic or a huge energy loss Pinpoint the Fault Location Decreases repair costs of the electric machines (preventing the propagation of the fault to other components) Better schedule of maintenance operations, in order to coincide with a scheduled stoppage Improved equipment longevity due to better operational practices Integrable on customer’s SCADA supervision system, or in any other monitoring platform - [MV Series](https://mitssolutions.asia/products/fira-vision/search-rescue/mv-series/): FIRA Thermal Monocular: Compact and Ergonomic Thermal Imaging The FIRA Thermal Monocular is designed to meet the needs of both law enforcement and civilian users. Its ergonomic compact design allows for extended use. It fits neatly into your pocket and has a sleep mode for quick and easy use. - [MP5-U Thermal Biocular](https://mitssolutions.asia/products/fira-vision/search-rescue/mp5-u-thermal-biocular/): FIRA MP5-U Thermal Biocular: Advanced Night Vision for Security and Hunting The FIRA MP5-U Thermal Biocular enhances night vision by providing clear visibility in low light or complete darkness. It helps detect objects, people and animals, allowing for immediate response to potential hazards. Ideal for security and hunting, this biocular ensures clear vision during night-time operations. - [F300-P Firefighting](https://mitssolutions.asia/products/fira-vision/search-rescue/f300-p-firefighting/): FIRA F300-P Firefighting Thermal Imager: Precision and Safety for Firefighting and Rescue Operations The FIRA F300-P Firefighting thermal imager with a high sensitivity 384×288 resolution infrared detector. Using the principle of infrared penetrating smoke, trapped people can be quickly located, rescue plans can be drawn up and carried out in a safe manner. It is an ergonomically designed for use with firefighters gloves and protective head gear. It meets fire protection standards and can be used for spot fire detection, search and rescue and fire investigations. - [DA Series](https://mitssolutions.asia/products/fira-vision/search-rescue/da-series/): FIRA DA Series: Advanced Driving Assistance Cameras The FIRA DA Series of Driving Assistance cameras provide a crisp clear image and are available in 256 x 192, 384 x 228, 640 x 512 and 1024 x 768 resolution of detectors. They are highly reliable and come with Auto Defrosting, various communication interfaces, optional Pedestrian Detection Systems (PDS) and an optional reinforced low temperature display.   - [DA-B Series](https://mitssolutions.asia/products/fira-vision/search-rescue/da-b-series/): FIRA DA Series: High-Resolution Driving Assistance Cameras with Dual Vision and Advanced Safety Features The FIRA DA Series of Driving Assistance cameras provide a crisp clear image and are available in 256 x 192, 384 x 228, 640 x 512 and 1024 x 768 resolution of detectors. The DA-B series adds a high quality visual camera for dual vision images. They are highly reliable and come with Auto Defrosting, various communication interfaces, optional Pedestrian Detection Systems (PDS) and an optional reinforced low temperature display. - [DA Series 800-L](https://mitssolutions.asia/products/fira-vision/search-rescue/da-series-800-l/): FIRA DA Series: Advanced Driving Assistance Cameras The FIRA DA Series of Driving Assistance cameras provide a crisp clear image and are available in 256 x 192, 384 x 228, 640 x 512 and 1024 x 768 resolution of detectors. The DA-B series adds a high quality visual camera for dual vision images. They are highly reliable and come with Auto Defrosting, various communication interfaces, optional Pedestrian Detection Systems (PDS) and an optional reinforced low temperature display. - [Blackbody Calibrators](https://mitssolutions.asia/products/fira-vision/fixed-thermography/blackbody-calibrators/): FIRA Vision Kelvin Blackbodies: Precision Temperature Calibration Fira Vision are distributors of Kelvin Blackbodies. Their Blackbodies cover temperatures ranging from –20°C to 1200°C with various apertures and cavities sizes available. - [UC-640](https://mitssolutions.asia/products/fira-vision/fixed-thermography/uc-640/): FIRA UC-640: Customisable Infrared Module for Versatile Integration and Enhanced Imaging The FIRA UC-640 featuring customisable electrical interfaces for seamless system integration, this compact and efficient device adapts to various IR detectors. With low power consumption and embedded image enhancement algorithms, it supports diverse applications including security, vehicle night vision, AIoT, and Industry 4.0. - [EX400-B](https://mitssolutions.asia/products/fira-vision/fixed-thermography/ex400-b/): FIRA Vision EX400-B: Bi-Spectrum Explosion-Proof Camera for Precision Monitoring in Hazardous Environments The Fira Vision EX400-B Bi-spectrum explosion proof camera is IP68 rated for use in dangerous environments. The 400 x 300 Vox microbolometer gives high accuracy temperature measurement. A high resolution Sony visual camera gives crisp digital images. Our intelligent software supports human and vehicle detection, people counting, industrial temperature monitoring using spot, line and area measurement tools. - [EX400](https://mitssolutions.asia/products/fira-vision/fixed-thermography/ex400/): FIRA Vision EX400: Explosion-Proof Camera for Accurate Monitoring in Hazardous Environments The Fira Vision EX400 explosion proof camera is IP68 rated for use in dangerous environments. The 400 x 300 Vox microbolometer gives high accuracy temperature measurement. Our intelligent software supports human and vehicle detection, people counting, industrial temperature monitoring using spot, line and area measurement tools. - [FS Series](https://mitssolutions.asia/products/fira-vision/fixed-thermography/fs-series/): FIRA Vision FS300: Advanced Fever Screening System with Bi-Spectrum Imaging and Intelligent Access Control The Fira Vision FS300 Fever Screening System incorporates a bi spectrum visual and thermal camera and a blackbody for high accuracy non contact, body temperature measurement. The system uses intelligent software which can include facial recognition to help control access. The system can be controlled by a laptop/PC or through a mobile App. Real time monitoring and data statistic reporting allows the user complete control of the environment. - [IM600-B](https://mitssolutions.asia/products/fira-vision/fixed-thermography/im600-b/): FIRA Vision IM600-B: High-Precision Bi-Spectrum Industrial Monitoring Camera The Fira Vision IM600-B Bi-spectrum Industrial Monitoring camera is IP66 rated for use in harsh environments. The 640 x 512 Vox microbolometer gives high accuracy temperature measurement. A high resolution Sony visual camera gives crisp digital images. Our intelligent software supports industrial temperature monitoring using spot, line and area measurement tools. The intelligent software allows the system to be used in a wide variety of areas. - [IM400](https://mitssolutions.asia/products/fira-vision/fixed-thermography/im400/): FIRA Vision IM400: Reliable Industrial Monitoring Camera for Accurate Temperature Measurement The Fira Vision IM400 Industrial Monitoring camera is IP66 rated for use in harsh environments. The 400 x 300 Vox microbolometer gives high accuracy temperature measurement. Our intelligent software supports industrial temperature monitoring using spot, line and area measurement tools. The intelligent software allows the system to be used in a wide variety of areas. - [IM200-B](https://mitssolutions.asia/products/fira-vision/fixed-thermography/im200-b/): FIRA Vision IM200-B: Bi-Spectrum Industrial Monitoring Camera for Accurate Temperature Measurement The Fira Vision IM200-B Bi-spectrum Industrial Monitoring camera is IP67 rated for use in harsh environments. The 256 x 192 Vox microbolometer gives high accuracy temperature measurement. A high resolution Sony visual camera gives crisp digital images. Our intelligent software supports industrial temperature monitoring using spot, line and area measurement tools. The intelligent software allows the system to be used in a wide variety of areas. - [P1 Thermal Mobile Phone](https://mitssolutions.asia/products/fira-vision/handheld-thermography/p1-thermal-mobile-phone/): FIRA P1 Mobile Infrared Thermal Imager: Rugged, Multi-Camera Precision for Versatile Applications The FIRA P1 mobile phone infrared thermal imager, high sensitivity 256*196 resolution infrared detector, 108 mega pixel rear camera, 32 mega pixel from camera, 20 mega pixel night vision camera and 6.5″ colour touch screen. Its rugged housing means it is drop proof, water proof and dust proof. The visual, thermal and night vision cameras all give clear and crisp images, accurate &amp; powerful easy to use features, it can help users quickly and convenient identify problems, making detecting more simple and efficient. Suitable for electrical and machinery maintenance, building testing, hiking, hunting, animal health and other application fields. - [A128 Acoustic Camera](https://mitssolutions.asia/products/fira-vision/handheld-thermography/a128-acoustic-camera/): FIRA VISION A128: Handheld Acoustic Imager for Precise Sound Source Detection and Maintenance The FIRA VISION A128 is a handheld acoustic imager that uses a high-precision microphone array and ultrasonic sound source positioning technology, through an imaging method of superimposing acoustic images and visible images. It displays the distribution status of sound sources in space, in real time. It can quickly identify partial discharge points, gas leak points, and abnormal equipment noise points, and improve inspection efficiency and maintenance times in partial discharge and gas leaks. - [GD20 SF6 Gas Detection](https://mitssolutions.asia/products/fira-vision/gas-detection/gd20-sf6-gas-detection/): FIRA GD20 Gas Leak Detector: Safe and Efficient Detection of SF6 and Gas Emissions The FIRA GD20 Gas Leak Detector is a non-contact, SF6 leak detector using a cooled infrared detector. This product is certified as intrinsically safe and explosion-proof, and inspectors can quickly find leaks of tiny concentrations of Sulphur hexafluoride and other gases and can pinpoint the source of leaks or emissions. This portable thermal imager can detect leaks from a safe distance, ensuring operator safety and allow engineers to fix the source of the issue. - [GD10 VOC Gas Detection](https://mitssolutions.asia/products/fira-vision/gas-detection/gd10-voc-gas-detection/): FIRA GD10 Gas Leak Detector: Intrinsically Safe Solution for VOC and Methane Leak Detection The FIRA GD10 Gas Leak Detector is an ATEX (EX ic nC op is llC T4 GC) certified non-contact, volatile organic gas (VOCs) leak detector using a cooled infrared detector. This product is certified as intrinsically safe and explosion-proof, and inspectors can quickly find leaks of tiny concentrations of methane, hydrocarbons and volatile organic gases (VOCs) and can pinpoint the source of leaks or emissions. This portable thermal imager can detect leaks from a safe distance, ensuring operator safety and allow engineers to fix the source of the issue. - [MX Series](https://mitssolutions.asia/products/fira-vision/handheld-thermography/mx-series/): FIRA VISION MX Series: Advanced Infrared Thermal Imaging with Superior Resolution and Precision The FIRA VISION MX Series professional high-performance infrared thermal imager, high sensitivity 1024 x 768/1280 x 1024 resolution infrared detector, 12 million pixel camera, laser rangefinder, 180° rotating axis view, 5.5″ colour touch screen. With its clear image, accurate & amp; powerful easy to use features, it can help users quickly and convenient identify problems, making detecting more simple and efficient. Super resolution and a range of automatically detected lens gives the user power tools to find issues. Suitable for electric power, electrical and machinery maintenance, metallurgy, petrochemical, building testing and other application fields. - [S Series](https://mitssolutions.asia/products/fira-vision/handheld-thermography/s-series/): FIRA S Series Infrared Thermal Imager The FIRA S series professional high-performance infrared thermal imager, high sensitivity 384×288 / 640×480 resolution infrared detector, 5 million pixel camera, laser rangefinder, 4.3 ” colour touch screen. With its clear image, accurate & amp; powerful easy to use features, it can help users quickly and convenient identify problems, making detecting more simple and efficient. Suitable for electric power, electrical and machinery maintenance, metallurgy, petrochemical, building testing and other application fields. - [M Series](https://mitssolutions.asia/products/fira-vision/handheld-thermography/m-series/): FIRA M Series Infrared Thermal Imager The FIRA M series professional high-performance infrared thermal imager, high sensitivity 384×288 / 640×480 resolution infrared detector, 5 million pixel camera, laser rangefinder, 180 ° rotating 5.5 ” colour touch screen. With its clear image, accurate & amp; powerful easy to use features, it can help users quickly and convenient identify problems, making detecting more simple and efficient. Suitable for electric power, electrical and machinery maintenance, metallurgy, petrochemical, building testing and other application fields. - [TP256 Phone Adapter](https://mitssolutions.asia/products/fira-vision/handheld-thermography/tp256-phone-adapter/): Precision Temperature Detection in a Compact Design The FIRA TP256 Thermal Phone Adapter Camera will quickly measure hot spots surface temperatures and accurately locate the faults with the TP256 Thermal Phone Adapter, a high quality thermal camera with a thermometer price. - [B200](https://mitssolutions.asia/products/fira-vision/handheld-thermography/b200/): FIRA B200 Handheld Infrared Thermal Imager The FIRA B200 infrared thermal imager, high sensitivity 256×192 resolution infrared detector and 5MP visual camera. It is an ergonomically designed handheld temperature measuring thermal imager, small and light and simple to operate. Quickly measure hot spots surface temperatures and accurately locate the faults. - [B160](https://mitssolutions.asia/products/fira-vision/handheld-thermography/b160/): FIRA B160 Handheld Infrared Thermal Imager The FIRA B160 infrared thermal imager, high sensitivity 160×120 resolution infrared detector. It is an ergonomically designed handheld temperature measuring thermal imager, small and light and simple to operate. Quickly measure hot spots surface temperatures and accurately locate the faults. A high quality thermal camera with a thermometer price. - [Eta600 Ultra: Optical Microphone](https://mitssolutions.asia/products/xarion/membrane-free-optical-microphones/sensors-for-ultrasound-in-air/eta600-ultra-optical-microphone/):   Optical Microphone – World’s first microphone without any moving parts With a frequency bandwidth ranging from 50 kHz to 4 MHz for air-coupled ultrasonic measurements and the highest sensitivity within the Eta product line, this sensor proves to be optimal for use in ultrasonic testing applications that require high resolution. In conjunction with XARION's technology for laser-based ultrasound excitation, the sensor is deployed in applications such as non-destructive testing (NDT) of semiconductor components and composite materials, used in the aerospace industry. - [AI-Powered Testing System - QAIros](https://mitssolutions.asia/products/gfai-tech/industrial-quality-testing/ai-powered-testing-system-qairos/): Automated Defect Detection System QAIros Using Acoustic Fingerprint Technology The detection of defects on a test object is one of the main reasons for the importance of process-integrated quality assurance (QA) in the manufacturing. Zero Defects concept (ZD) in the production is often required in critical industries (e.g. automotive or medical technology). Our quality testing system QAIros offers you an automated classification of test objects with the highest reliability. There is a unique acoustic fingerprint for each test object, which depends on its geometry and material properties. Defects of various kinds alter the acoustic fingerprint. Whether it is due to defective materials, deviating shape or incorrect assembly, the acoustic properties of the test object will show significant changes. Our innovative quality assurance system uses this principle. It records the acoustic response with conventional measuring microphones and uses it to train an AI model. This model can identify the highly complex correlations between test objects with and without damage and, based on this, make a reliable classification for new components. - [Muffler software AcoustiCalc® Silencer](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings-software/muffler-software-acousticalc-silencer/): Analysis Software AED 8001 – AcoustiCalc® for Systems of Mufflers The muffler software AcoustiCalc® Silencer is a powerful tool for the acoustic design of single elements and complex systems of silencers and mufflers by simulating the insertion loss and the transmission loss. The working principle of the simulation software for silencers is based on the analytical description of the specific elements of ducts and mufflers as quadrupoles according to linear network theory. All models correspond to the current state of the art and were additionally optimized by us by means of numerical simulations. By concatenation of the single elements, the acoustic behavior of arbitrary and complete systems of mufflers can be calculated easily and fast with respect to defined operational conditions. - [Sound Absorber Software AcoustiCalc® Absorber](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings-software/sound-absorber-software-acousticalc-absorber/): Advanced Software for Efficient Acoustic Design and Simulation of Sound Absorbers The sound absorber software AcoustiCalc® Absorber is an effective tool for the acoustic design of multi-layer sound absorbers by simulating the sound absorption coefficient. The working principle of the simulation software for sound absorbers is absed on the analytical description of the single layers of the sound absorbers as fourpoles according to the linear network theory. All models ar from the current literature. By concatenation of open-cell material layers in combination with air gaps, the acoustic behavior of arbitrary and multi-layer sound absorbers can be calculated simply and fast under defined environmental conditions. By predicting results of measurements of the sound absorption coefficient in the reverberation chamber and/or the Alpha cabin, already in the early stage of development time, money and material can be saved. - [Vibro-acoustics Software M AlphaCell](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings-software/vibro-acoustics-software-m-alphacell/): AlphaCell - Probably the Most Advanced TMM/FTMM Suite for NVH Simulations AlphaCell is a state-of-the-art software that allows the vibro-acoustic evaluation of multi-layer systems. Based on a multitude of available parametrized calculation models, different quantities and indicators – relevant in the area of architectural acoustics and room acoustics – can be computed. Besides the sound absorption, this includes the sound insulation, impact sound level, sound power and others quantities. The multi-layer system is set up by an arbitrary number of single layers – each described by means of geometric dimensions together with acoustic and dynamic material parameters. - [Test Setup for eigenfrequencies AcoustiNF](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings/test-setup-for-eigenfrequencies-acoustinf/): Efficient Measurement and Quality Control of Natural Frequencies in Solid Structures using AcoustiNF The test setup for eigenfrequencies AcoustiNF serves the measurement and verification of the natural frequencies (resonance frequencies) of solid structures. In combination with a DMC Code scanner and scales, the detection and the quality control of fabricated constructional elements and components (e. g. forged aluminum) of a series can be carried out easily and in no time. - [Sound Absorption Meter MT In Situ Absorption](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings/sound-absorption-meter-mt-in-situ-absorption/): A Truly in situ Method to Accurately Measure the Properties of Your Material With the measuring system “In situ Absorption”, the Gesellschaft für Akustikforschung Dresden mbH offers a compact hand-held solution for contact-free and nondestructive testing of sound absorbing properties of open-cell materials and structured surfaces. By means of the “Scan&Paint” option, acoustic properties can be mapped as colored, two-dimensional distribution which can be laid a photograph of the test object underneath. - [Test Setup for Mufflers AcoustiTube® HighTemp](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings/test-setup-for-mufflers-acoustitube-hightemp/): Measuring System AED 1400 – AcoustiTube® HighTemp for Determination of Efficiency of Mufflers at Temperatures up to 600 °C The gained measurement data of an evaluated muffler can be applied as input parameters for calculating the spectral transmission loss or the spectral insertion loss of complete systems of silencers and mufflers by means of the analysis software AED 8001 – AcoustiCalc® as in the case that the measured muffler is integrated to a complete exhaustion system. - [Impedance Tube AcoustiTube®](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings/impedance-tube-acoustitube/): Measuring System AED 1000 – AcoustiTube® for Determining the Sound Absorption Coefficient, the Sound Reflection Factor and the Impedance Ratio The impedance tube AcoustiTube® is a measuring system for determining the sound absorption coefficient, the sound reflection factor and the impedance ratio of materials in the laboratory on the basis of the transfer function method described in DIN EN ISO 10534-2 and ASTM E1050. The extension of the impedance tube to a transmission tube allows the additional measurement of the characteristic absorber values and the transmission loss of open-cell materials according to ASTM E2611. By means of a special compression specimen holder, the material parameters can be measured under defined compression as well. - [Sound Absorption Meter AcoustiAdrienne](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings/sound-absorption-meter-acoustiadrienne/): Sound Absorption Meter AcoustiAdrienne for Nondestructive Measurement of Sound Absorption, Sound Insulation and Sound Diffraction The sound absorption meter AcoustiAdrienne serves the nondestructive measurement of the sound absorption, sound reflection, sound insulation and the sound diffraction of a noise barrier at a road or a railway on the basis of the Adrienne method described in DIN EN 1793-4 and DIN EN 16272-4, DIN EN 1793-5 and DIN EN 16272‑5 as well as DIN EN 1793-6 and DIN EN 16272-6. By means of an adapter, the sound absorption coefficient of a road surface according to DIN ISO 13472-1 in situ as well as the sound absorption coefficient of a noise barrier according to DIN CEN/TS 1793‑5 and DIN CEN/TS 16272-5 can be determined nondestructively. On the basis of the measuring results, the sound reflection of noise barriers can be rated according to ZTV Lsw 22 (for non-reverberant situations). Furthermore, the rated sound absorption coefficient according to DIN EN ISO 11654 of a wall absorber or ceiling absorber being installed in a room can be estimated as well.   - [Airflow Resistivity Meter AcoustiFlow®](https://mitssolutions.asia/products/acoustic-engineering-dresden/acoustic-instrumentation-material-testings/airflow-resistivity-meter-acoustiflow/): Measuring System AED 300 – AcoustiFlow® for Determination of Airflow Resistance This new system is perfectly suited for demanded measurements. Whether performing detailed acoustic analysis of products and components, locating leaks in buildings and pipelines, or performing correlation measurements on rotating machinery for order analysis, the Octagon sound camera is ready to deliver accurate results. Due to the dense microphone distribution, beamforming as well as holography measurements are possible – covering a frequency range of 30 Hz – 24 kHz. - [Acoustic Emission MTEU3H 4 Channels AE DAQ](https://mitssolutions.asia/products/fuji-ceramics/piezoelectric-ceramic-sensors/acoustic-emission-mteu3h-4-channels-ae-daq/):   Acoustic Emission (AE) System MTEU3H 4 Channels AE DAQ 10 MHz sample rate 16bit resolution 1GB DDR   MTAE Software AE signal real-time acquisition, data analysis and replay analysis. Friendly interface, simple operation Powerful digital filtering function High degree of customization, various acquisition configuration and visualization of AE parameters and waveform. Various 3D positioning diagram display, linear, planar, cube, cylinder, tank bottom, sphere location etc. FFT, wavelet, intensity and activity, clustering analysis etc.   MT40 AE Sensor with Built-in Pre-Amp Frequency Range 15KHz to 65KHz Resonant Frequency 50kHz   MT150 AE Sensor with Built-in Pre-Amp Frequency Range 60kHz to 390kHz Resonant Frequency 150kHz - [Earthquake Engineering](https://mitssolutions.asia/products/wolfel/earthquake-engineering/earthquake-engineering/):   For More Functional and Structural Safety – Seismic Design of Plant Parts and Components Earthquake-resistant Construction Earthquake Verification According to International Standards Planners and operators of plants, machines and structures are at minimum responsible for their stability, which can become a challenge in seismically active areas.   Different locations require different standard-compliant earthquake design of buildings, plants, machinery, components and infrastructure. The focus is, of course, primarily on the safety of employees and residents, but our solutions also aim to protect the investment and maintain operational capability.   Earthquakes themselves generally pose much less immediate danger to people than many people think. Rather, the problem is buildings, machines, plants and infrastructures that are not (structurally) safe or lose their integrity or functionality, thus putting human lives at risk and leading to high costs. The good news: By applying and adhering to standards and guidelines, the risks are minimized to an acceptable level – both in the context of new construction and new design of plants and components, as well as during recalculation and retrofitting. The protection of persons or the safety of a plant can be additionally increased with a targeted integration of a monitoring system for the detection of earthquakes. - [CNC - Computer Numerical Control Machines](https://mitssolutions.asia/products/cnc/cnc-machines/cnc-computer-numerical-control-machines/): CNC are complex machines controlled by a computer and provide a level of efficiency, accuracy and consistency that would be impossible to achieve through a manual process.   Operations that were impossible years ago are now easy thanks to CNC machining. Just as there are many different parts that CNC machines can make, there are also various types of CNC machines used to accomplish this. Each machine differs in construction, the way they operate and the types of product they can make.   We offer the following types of CNC machines for your manfucturing needs:   Lathe Machine: Flat Bed CNC Lathe Slant Bed CNC Lathe Conventional Lathes Twin-Spindle Twin-Gang CNC Lathe Swiss Turn CNC Lathe CNC Vertical Lathe   Milling Machine: Vertical Machining Center Double Column Machining Center Boring Machine Ultrasonic Spindle Machining Center 5-Axis Machining Center   Customised Model: Bar Head Reducing Machine Others (contact us) - [HI-DEF PTZx](https://mitssolutions.asia/products/sensor-network-inc/remote-visual-inspection/hi-def-ptzx/):   HD VISUAL INSPECTION. PAN . TILT . ZOOM . HI-DEF PTZx is a portable, Pan-Tilt-Zoom-Lights, fully high-definition (1920×1080), color video inspection system loaded with features to efficiently inspect tanks, vessels, drums and other large confined spaces and piping systems. State-of-the-art integral white LEDs provides over 2000 lumens of cool white-light along with add-on auxiliary lighting to brighten the darkest of environments. - [smartPIMS® 2.0](https://mitssolutions.asia/products/sensor-network-inc/non-intrusive-asset-integrity-monitoring/smartpims-2-0/):   The next generation system for non-intrusive ultrasonic corrosion/erosion monitoring of critical assets. The smartPIMS 2.0 offers a variety of connectivity options designed to provide an optimized solution for any application. Each multi-point monitoring system can connect up to 16 ultrasonic sensors to provide enhanced coverage of known critical and problematic locations. Data can be collected manually or cellularly to webPIMS™ software for databasing, trending, and analysis. - [matPIMS®](https://mitssolutions.asia/products/sensor-network-inc/non-intrusive-asset-integrity-monitoring/matpims/):   matPIMS® - non-intrusive corrosion/erosion area monitors Designed to take ultrasonic thickness readings to be collected and analyzed over time.   Built in two variations (3×5 and 1×15), matPIMS are comprised of single-element ultrasonic sensors in an array/matrix pattern to provide consistent coverage of targeted or critical areas.   Data is transmitted to a SCADA/DCS system via Modbus (RS-485) for frequent polling, or manually offloaded using a PC/laptop. The data can then be transmitted to webPIMS™ for recording, trending, and analysis. - [Piezoelectric Acoustic Emission Sensor](https://mitssolutions.asia/products/fuji-ceramics/piezoelectric-ceramic-sensors/piezoelectric-acoustic-emission-sensor/):   Piezoelectric ceramics is one of electronic ceramics. When a piezoelectric ceramic is hit, a high voltage is generated instantaneously, and conversely, when a voltage is applied, the piezoelectric ceramic expands and contracts. Piezoelectric ceramics are ceramics that have the function of converting electrical energy and mechanical energy.   Fuji Ceramics offers elements suitable for various applications while selecting a wide range of materials for piezoelectric ceramics through consistent processes from research and development to manufacturing.   The application fields of piezoelectric ceramics can be broadly divided into vibrators and transducers. Vibrators are used for electrical input – mechanical vibration – electrical output, and include ceramic oscillators, filters, piezoelectric buzzers, and piezoelectric transformers. Transducers include ultrasonic cleaners and actuators that use electrical input-mechanical output, and vibration/shock sensors and piezoelectric elements that use mechanical input-electrical output. There are a wide range of application fields that have been put into practical use. - [Piezoelectric Force Sensor](https://mitssolutions.asia/products/fuji-ceramics/piezoelectric-ceramic-sensors/piezoelectric-force-sensor/):   Piezoelectric ceramics is one of electronic ceramics. When a piezoelectric ceramic is hit, a high voltage is generated instantaneously, and conversely, when a voltage is applied, the piezoelectric ceramic expands and contracts. Piezoelectric ceramics are ceramics that have the function of converting electrical energy and mechanical energy.   Fuji Ceramics offers elements suitable for various applications while selecting a wide range of materials for piezoelectric ceramics through consistent processes from research and development to manufacturing.   The application fields of piezoelectric ceramics can be broadly divided into vibrators and transducers. Vibrators are used for electrical input – mechanical vibration – electrical output, and include ceramic oscillators, filters, piezoelectric buzzers, and piezoelectric transformers. Transducers include ultrasonic cleaners and actuators that use electrical input-mechanical output, and vibration/shock sensors and piezoelectric elements that use mechanical input-electrical output. There are a wide range of application fields that have been put into practical use. - [Piezoelectric Acceleration Sensor](https://mitssolutions.asia/products/fuji-ceramics/piezoelectric-ceramic-sensors/piezoelectric-acceleration-sensor/):   Piezoelectric ceramics is one of electronic ceramics. When a piezoelectric ceramic is hit, a high voltage is generated instantaneously, and conversely, when a voltage is applied, the piezoelectric ceramic expands and contracts. Piezoelectric ceramics are ceramics that have the function of converting electrical energy and mechanical energy.   Fuji Ceramics offers elements suitable for various applications while selecting a wide range of materials for piezoelectric ceramics through consistent processes from research and development to manufacturing.   The application fields of piezoelectric ceramics can be broadly divided into vibrators and transducers. Vibrators are used for electrical input – mechanical vibration – electrical output, and include ceramic oscillators, filters, piezoelectric buzzers, and piezoelectric transformers. Transducers include ultrasonic cleaners and actuators that use electrical input-mechanical output, and vibration/shock sensors and piezoelectric elements that use mechanical input-electrical output. There are a wide range of application fields that have been put into practical use. - [EDU Kit](https://mitssolutions.asia/products/advacam/imaging-camera/edu-kit/edu-kit/):   The ADVACAM Radiation Education Kit is a setup of radiation camera and accessories to better understand nuclear and particle physics. The kit brings the latest CERN technology to classrooms and allows students to discover the invisible world of radiation. Introducing Particle Physics in the Classroom with Advacam’s MiniPIX EDU Device and Educational Kit. These tools change how particle physics is taught in schools and universities by allowing students to directly observe and analyze particle interactions. This hands-on approach helps to clarify complex ideas. The user-friendly interface and portable design of the MiniPIX EDU make it easier for teachers to include real-world demonstrations in their lessons. - [MiniPIX SPACE](https://mitssolutions.asia/products/advacam/imaging-camera/minipix/minipix-tpx3-space/): Precision and durability in space particle tracking and radiation monitoring ADVACAM provides cost-reducing technology for your satellite implemented for radiation mapping on the ISS, Gateway lunar station, or NASA‘s Orion Spaceship. The advanced MiniPIX SPACE is a cutting-edge particle camera specifically designed to operate in demanding space conditions. The MiniPIX SPACE is a compact, low-power radiation camera equipped with a Timepix3 chip for precise particle tracking and imaging. Engineered for durability, it offers enhanced mechanical properties. It has passed stringent environmental testing, including a humidity test, a tri-axial vibration test, and a thermal ambience test, all conducted under ECSS standards. - [MiniPIX MAGIC Flex](https://mitssolutions.asia/products/advacam/imaging-camera/minipix/minipix-tpx3-flex/):   Miniaturized ready for integration radiation camera with a Timepix3 chip The MiniPIX MAGIC Flex detector incorporates single Timepix3 chip (256 x 256 pixels with a pitch of 55 μm) with a Silicone or Cadmium Telluride sensor according to customer preference. Custom types such as GaAs or CZT are possible too. The detector is position, energy, and time-sensitive. This means it digitally registers its position, energy, time of arrival, and track shape of every single particle that comes in contact with the sensor. Other information can be calculated form this data, such as particle type, direction of flight, its energy, or charge. The device collects data in pixel mode, which means each hit is read out immediately at a maximal rate of 2.3 million hit pixels per second. This makes the MiniPIX MAGIC detector ideal solution for all particle tracking aplications - [Hydrostatically Guided Slip Tables](https://mitssolutions.asia/products/tira-gmbh/slip-tables/hydrostatically-guided-slip-tables/):   Increasing demands on vibration testing require additional slip table systems, also ensuring tests in horizontal direction on large and heavy specimens in mounting position. The Monobase design allows quick and precise alignment and coupling of shaker to the slip table. Shaker and slip table are mounted on a common frame.   Oil film slip tables with hydrostatic guidance from TIRA give you a compact system for a variety of vibration tests, including those of large and heavy specimens which generate high yaw, roll and pitch moments due to their high centers of gravity above the slip plate. These tables use high-pressure bearings with a separate hydraulic supply unit.   Special features: Enclosed oil aggregate with return flow pump Integrated oil pan Non-contact displacement Monitoring (only with AIT-system) 100 mm displacement possible (with the appropriate shaker) - [Oil-Film Guided Slip Tables](https://mitssolutions.asia/products/tira-gmbh/slip-tables/oil-film-guided-slip-tables/):   Increasing demands on vibration testing require additional slip table systems, also ensuring tests in horizontal direction on large and heavy specimens in mounting position. The Monobase design allows quick and precise alignment and coupling of shaker to the slip table. Shaker and slip table are mounted on a common frame.   Oil-film slip tables consist of a precision grinded and lapped natural granite block with a magnesium plate that slides on an oil film. Four linear guides guarantee the lateral guidance of the slip plate and minimize transverse motion.   Special features: Integrated oil pan Non-contact displacement monitoring (only with AIT-System) 100 mm displacement possible (with the appropriate shaker) - [Induction Ring Vibration Test Systems 140000](https://mitssolutions.asia/products/tira-gmbh/vibration-test-systems/induction-ring/induction-ring-vibration-test-systems-140000/):   Induction ring shakers operate with an all-metal moving coil with a single winding, in which an alternating voltage is induced by surrounding static coils, thus setting the moving coil in motion. Cooling is provided by a combined water/air cooler. The external cooling unit also provides the lubricant for the hydrostatic bearings, which enable friction-free mounting of the vibration armature.   Advantages of induction ring shakers: No power connection to the vibration armature necessary -> Less failure susceptibility High mechanical strength of the moving coil -> Greatly reduced maintenance requirements High acceleration values High resonance frequency of the vibrating armature - [Inertial Vibration Test Systems 125N to 650N](https://mitssolutions.asia/products/tira-gmbh/vibration-test-systems/inertial/inertial-vibration-test-systems-125n-to-650n/): Application of dynamic forces to large structures Coupling at any angle within 360 degree Excitation by permanent magnets Special spring system provides optimal guidance - [Longstroke Vibration Test Systems 4000N to 15000N](https://mitssolutions.asia/products/tira-gmbh/vibration-test-systems/longstroke/longstroke-vibration-test-systems-4000n-to-15000n/): Used for calibration of sensors Ceramic vibration system Very high utilizable frequency range up to 25 kHz Special guide system - [Calibration Vibration Test Systems 100N to 800N](https://mitssolutions.asia/products/tira-gmbh/vibration-test-systems/calibration/calibration-vibration-test-systems-100n-to-800n/): Used for calibration of sensors Ceramic vibration system Very high utilizable frequency range up to 25 kHz Special guide system - [Modal Vibration Test Systems 4000N to 15000N](https://mitssolutions.asia/products/tira-gmbh/vibration-test-systems/modal/modal-vibration-test-systems-4000n-to-15000n/): High cross-axial stiffness 100 mm displacement Electronic zero-point regulation for precisely coupling the shaker to the specimen Electronically adjustable stiffness - [Modal Vibration Test Systems 100N to 2700N](https://mitssolutions.asia/products/tira-gmbh/vibration-test-systems/modal/modal-vibration-test-systems-100n-to-2700n/): Excited by permanent magnets (smaller or equal to 400 N) Light-weight design (smaller or equal to 400 N) Especially applicable for mobile use  (smaller or equal to 400 N) High cross-axial stiffness up to 45 mm displacement (larger or equal to 1000 N) Electronic zero-point regulation for precisely coupling the shaker to the specimen Electronically adjustable stiffness MOSP-Models: through hole in the center of the armature for using piano-wire stingers - [Railway System Solutions](https://mitssolutions.asia/products/wolfel/railway-system-solutions/railway-system-solutions/): Optimizing Rail Transport through Predictive Maintenance, Noise Control Measures and Multibody Simulation (MBS) Trains ideally transport passengers and goods swiftly and securely to their destinations. Our objective is to precisely guarantee that. From track and switch to locomotive and wagon, from development to construction and operation to maintenance – all these elements and processes must function seamlessly and reliably. Our contribution lies in enhancing trains through virtual test drives utilizing the MBS model, ensuring noise and vibration control for conflict-free and secure construction site and maintaining dependable operations through condition-based maintenance supported by predictive maintenance and AI. - [Structural Health Monitoring for Wind Turbines](https://mitssolutions.asia/products/wolfel/structural-health-monitoring/structural-health-monitoring-for-wind-turbines/): Structural Health Monitoring for Wind Turbines – Condition Monitoring of Foundation, Tower and Rotor Blades Wind turbines fault and damage detection at an early stage, life cycle prognosis, and the optimization of wind farm operations. Regardless of location, a sustainable reduction of operating costs with a simultaneous increase in yields is gaining more and more relevance. Therefore, it is more important than ever to detect structural damage and icing at an early stage in order to avoid severe damage. Structural health monitoring (SHM) of the foundation, tower and rotor blade and conventional condition monitoring (CMS) on the drive train are becoming increasingly important in this context. - [Gas Turbine Applications](https://mitssolutions.asia/products/miratech/gas-turbine-applications/gas-turbine-applications/): Our gas turbine customers span a wide spectrum of applications, including: Central power plants operating large gas turbines in baseload and peaker configurations Industrial facilities, hospitals and universities practicing distributed generation using small- to mid-sized gas turbines Natural energy infrastructure and transmission stations operating gas turbines to drive large compressors You’ll find them using MIRATECH oxidation catalyst, catalyst support structures and a variety of catalyst lifecycle services. - [Catalyzer™ — Silencer Sizing Tool Catalyzer Silencer Sizing Tool](https://mitssolutions.asia/products/miratech/silencers/catalyzer-silencer-sizing-tool-catalyzer-silencer-sizing-tool/): Web-Based Engine Exhaust System Design And Sizing Tool For design of power generation, energy infrastructure, marine, industrial or off-road engine-exhaust systems. Full range of exhaust silencer grades plus system piping accessories. Acoustic and system backpressure calculations based on silencer-grade selections and piping-layout On-screen 3D workspace with split screen view allows modifications and real-time modeling of exhaust system components. Preloaded, searchable engine database or user data input. Login from anywhere to create or update silencer project calculations, proposals, and drawing packages. - [Exhaust System](https://mitssolutions.asia/products/miratech/silencers/exhaust-system/): MIRATECH has been a system supplier for many years. We design and supply the entire exhaust gas line as a complete unit directly to the construction site. All components behind the turbocharger, exhaust aftertreatment system (SCR + Cat), silencers and energy recovery up to the chimney form a complete exhaust system. The more complex the requirements are, the more important it is to have an optimal combination of the respective required components. AIR-SONIC can already meet today’s future demands, as they come from the tightening of TA-Luft requirements. Stricter limits for nitric oxide, formaldehyde and other pollutants require new technologies. Residual sound levels in industrial plants, especially in mixed-use zones, are becoming more complex and require efficient exhaust silencers. The reduction of the exhaust noise can be optimized to the required residual sound level by considering all the components contained in the exhaust system: SCR system, oxidation catalytic converter, exhaust gas heat exchanger and primary and secondary silencer. - [Process Silencers](https://mitssolutions.asia/products/miratech/silencers/process-silencers/): Controlling noise especially in industrial process manufacturing plants is not easy. Machinery such as large or small high speed positive displacement blowers, industrial fans, low pressure vents, centrifugal compressors, gas turbine engines, centrifugal blowers, vacuum pumps, etc. require noise control measures to meet a facility’s sound abatement requirements. As part of our product portfolio, we manufacture industrial process silencers for power vent and blowdown applications. In addition, we also offer rotary positive blower silencers, relief valve and control valve silencers, pressure reduction silencers, vacuum pump silencers, blower and centrifugal compressor/fan silencers, and intake and discharge silencers for air or gas service…as well as piping and stacks. Some additional applications examples include systems with pressure relief valves (PRV); high-velocity air, steam, and gas vents and blowdowns; relief valves and control valves; switch valves; steam ejectors; autoclaves; high-pressure air vents; compressor blow off valves; steam boiler relief valves; air valves and cylinders; etc. - [COWL Silencers](https://mitssolutions.asia/products/miratech/silencers/cowl-silencers/): Cowl Silencers feature residential grade attenuation (22 – 28 dB) in sizes from 1” up to 12” inlet diameter. Aluminized steel is standard construction and stainless steel in 304, 316, and 321 grades is available as an option. Cowl silencers are available in several standard inlet/outlet configurations as well as standard choices for various connection types. - [EM Silencers](https://mitssolutions.asia/products/miratech/silencers/em-silencers/): MIRATECH designs and manufactures engine silencers ranging in attenuation from industrial through hospital grade. MIRATECH’s Cylindrical Series Silencers are conventionally shaped cylindrical designs that range in size from 1” up to 48” inlet diameter. While large inlet size silencers are less common, MIRATECH has the experience and capability to design and manufacture exhaust silencing systems for some of the world’s largest engines. - [SCR/DPF Solutions](https://mitssolutions.asia/products/miratech/scr-dpf-solutions/scr-dpf-solutions/): MIRATECH provides cost-effective, reliable, mission-critical emission and acoustical solutions for stationary natural gas and diesel reciprocating engines. Miratech caters solutions to both small (HP < 300) and large stationary engine applications (up to 14,000 horsepower). MIRATECH offers a comprehensive range of catalysts, housings, silencers, monitoring systems and related services that address and reduce engine-exhaust pollutants such as NOx, CO, VOC, diesel particulate, HAPs, and noise. Along with high-quality products, their engineering team provides each customer with solutions specific to their emission-control requirements and installation-configuration challenges. - [Catalysts & Housings](https://mitssolutions.asia/products/miratech/catalysts-and-housings/catalysts-housings/):   MIRATECH provides cost-effective, reliable, mission-critical emission and acoustical solutions for stationary natural gas and diesel reciprocating engines. Miratech caters solutions to both small (HP < 300) and large stationary engine applications (up to 14,000 horsepower). MIRATECH offers a comprehensive range of catalysts, housings, silencers, monitoring systems and related services that address and reduce engine-exhaust pollutants such as NOx, CO, VOC, diesel particulate, HAPs, and noise. Along with high-quality products, their engineering team provides each customer with solutions specific to their emission-control requirements and installation-configuration challenges. - [Hans Tools](https://mitssolutions.asia/products/hans-tools/hans-tools/): World Class Tools for Professionals and Industries HANS TOOL has maintained a position of leadership on manufacturing quality professional and Industrial hand & air tools including Sockets, torque wrenches & spanners , screwdrivers, bits , hex key, pliers, saw, cutters, Hammer, tool set, case, wagon, and others. It meets Germany DIN & ISO and covers ANSI standards that assure Hans Tools with the features of high Torque and extra Durable performance each tool is professional designed and precision-made, carefully quality control every process of team-work that lead Hans products not just perfect appearance; rather; constant improving will always benefit the users and satisfied with Hans world- class quality warranty. The company is an ISO 9001 Quality certified company. Hans Tool offers tools for hardware shops, Aviation, Car, Truck, Crane, shovel, Marine Repair; Petrol chemical , field, Gas, Defence, Water, Telecom., CATV, Electric supplies and lines work , infrastructures, mining, Heavy duty Industries.     CONTACT US for more information - [Piezoelectric Ceramics](https://mitssolutions.asia/products/fuji-ceramics/piezoelectric-ceramic-sensors/piezoelectric-ceramics/):   Piezoelectric ceramics is one of electronic ceramics. When a piezoelectric ceramic is hit, a high voltage is generated instantaneously, and conversely, when a voltage is applied, the piezoelectric ceramic expands and contracts. Piezoelectric ceramics are ceramics that have the function of converting electrical energy and mechanical energy.   Fuji Ceramics offers elements suitable for various applications while selecting a wide range of materials for piezoelectric ceramics through consistent processes from research and development to manufacturing.   The application fields of piezoelectric ceramics can be broadly divided into vibrators and transducers. Vibrators are used for electrical input - mechanical vibration - electrical output, and include ceramic oscillators, filters, piezoelectric buzzers, and piezoelectric transformers. Transducers include ultrasonic cleaners and actuators that use electrical input-mechanical output, and vibration/shock sensors and piezoelectric elements that use mechanical input-electrical output. There are a wide range of application fields that have been put into practical use. - [Acoustic Systems](https://mitssolutions.asia/products/faist/acoustic-systems/acoustic-systems/):   FAIST develop claddings for acoustic measurement rooms, aeroacoustic wind-tunnel facilities and free-field rooms for renowned automobile manufacturers and many other sectors.   FAIST supplies products at the cutting-edge of technology: from large, anechoic rooms for simulated pass-by-noise measurements and acoustic measurement rooms for motors, drives and powertrains to rooms for individual, specific components.   Custom solutions for vehicle test rigs, brake test rigs, engine test rigs, hydraulic gears, airbag test rigs, engine test rigs and more with hybrid solutions (“climate meets acoustics”), as well as acoustic laboratories with defined reverberation time for personal sound perception. A new product in the portfolio is the cladding of vertical wind tunnels. - [Noise Reduction System](https://mitssolutions.asia/products/faist/noise-reduction-systems/noise-reduction-acoustic-and-power-systems/):   Sound insulation and noise mitigation systems Custom and tailored fit sound and noise insulation systems for various industries that guarantee you reliable protection of persons and environment. Audiometric rooms and test facility technology for accurate sound measuring are also offered.   Custom and tailored fit noise mitigation systems for energy systems and power plants. The innovative noise-protection power systems can be used in gas turbines, steam turbines, cogeneration plants, small power stations, transformer stations, and refrigerator plants. - [Operator Training Simulator](https://mitssolutions.asia/products/simtronic/process-industry-operator-training-simulator/operator-training-simulator/):   World leader in the development of innovative Operator Training Simulators (OTS) for the Process Industries and the Educational Institutions which support them. The OTS delivers tools to help customers in the process industries and vocational schools to develop their workforce and students to achieve safe and effective plant operations. - [microPIMS](https://mitssolutions.asia/products/sensor-network-inc/non-intrusive-asset-integrity-monitoring/micropims/):   microPIMS® Intrinsically Safe - fully wireless, non-intrusive, ultrasonic corrosion/erosion monitoring system Powered by long-life batteries, it operates using long range (>1 mile/1.6Km) sub Gigahertz wireless connectivity. Each microPIMS sensor is programmed to take readings at user-defined intervals and send data to Sensor Networks proprietary webPIMS™ software, a cloud-based or on-premises back-end web portal for analysis, trending, and more. - [Electro UV3D Printer](https://mitssolutions.asia/products/chem-cubed/electrojet-printer/electro-uv3d-printer/):   Digitally prints both silver conductive inks and UV curable dielectric insulating / building inks Inline LED UV curing of dielectric insulating inks Inline Heat Sintering of silver conductive inks 12" x 24" printing bed w/ silicone tacky mat 1.5 pl to 21 pl drop size 1440 dpi resolution 8-channel inkjet head enables simultaneous multi-material, multi-layer printing of electronic circuits and components - [ElectroJet Specialty Inks](https://mitssolutions.asia/products/chem-cubed/electrojet-materials/electrojet-specialty-inks/electrojet-specialty-inks/):   Primer - serves as coupling agent between substrate surface and conductive ink Security Ink - provides detectable image (watermark) embedding into the dielectric layers (scroll down to see demo video below) Solder Mask Ink - solder process resistant top layer ink Support Ink - water soluble support material for 3D building applications C3-PR-3 - Wipable primer solution for LSE surface preparation   C3-SEC-7 - ElectroJet UV curable security marking ink   C3-SMR-7 - ElectroJet UV curable solder mask resist ink   C3-SUP-1031-5 - ElectroJet UV curable water soluble support material - [ElectroJet Dielectric Insulating Inks](https://mitssolutions.asia/products/chem-cubed/electrojet-materials/electrojet-dielectric-insulating-inks/electrojet-dielectric-insulating-inks/):   Dielectric performance - insulation between conductive layers Adhesion promotion - may be applied as base layer to optimize adhesion to low surface energy substrates Print enhancement - provides optimal surface properties for conductive ink holdout and image resolution Protective encapsulation - protect conductive traces from moisture, chemicals and physical abrasion of the external environment Printing Compatibility - viscosity tuned for ElectroJet brand ElectroUV3D printer or other industry brand heads and printers (Ricoh, Konica-Minolta, Fuji, Xaar) C3-DI-7 - ElectroJet UV curable dielectric insulating ink for the ElectroUV3D inkjet printer   C3-OPT-7 - ElectroJet optically clear UV curable dielectric insulating ink for the ElectroUV3D inkjet printer   C3-DI-8 - ElectroJet flexible UV curable dielectric insulating ink for the ElectroUV3D inkjet printer   DI-7h / OPT-7h / DI-8h - ElectroJet dielectric inks tuned for viscosity specs of industrial inkjet head brands - [ElectroJet Particle-free Silver Conductive Ink](https://mitssolutions.asia/products/chem-cubed/electrojet-materials/electrojet-particle-free-silver-conductive-ink/electrojet-particle-free-silver-conductive-ink/):   Conductive Performance - near bulk of silver conductivity (resistivity in range of 10-8 Ohm*M) Sintering Efficiency - as low as 80 degrees C in minutes (scroll down to see demo video below) Jetting Reliability - particle free formulation won't clog heads and does not require recirculation Printing Compatibility - viscosity tuned for ElectroJet brand electroUV3D printer or other industry brand heads and printers (Ricoh, Konica-Minolta, Fuji, Xaar) C3-Ag-1037-2 - ElectroJet silver conductive ink for the ElectroUV3D inkjet printer   C3-Ag-1037-2h - ElectroJet silver conductive ink, tuned viscosity for industrial inkjet specifications - [Alucast Circular Covers](https://mitssolutions.asia/products/geosense/drilling-supplies/geotextile-wellscreen-filter/):   Alucast water resistant circular covers offer lightweight, high security closure for installation within petrol forecourts or similar industrial environments.   The body and lid are made from heavy aluminium, ribbed for maximum load bearing capacity and tested to H-20 rating. They can be installed easily into either a pre-drilled circular hole or concreted into grade. They are water resistant due to the internal gasket sealing ring.   Fitted with counter sunk stainless steel locking screws and O-rings, which can be undone and re-locked easily, they offer a simple and secure locking device for groundwater monitoring wells. They are marked ‘Monitoring Well DO NOT FILL’ for clear identification and to avoid any unauthorised access. - [Ordinary Portland Cement](https://mitssolutions.asia/products/geosense/drilling-supplies/ordinary-portland-cement/):   Ordinary Portland Cement (OPC) can be mixed with ballast, sand and gravel for concreting or together with Bentonite for grouting.   It is manufactured to comply with the requirements of BS EN 197-1 CEM I Portland cement strength class 42.5/52.5N.   CEM I PC is CE Marked in accordance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Constructions Products Regulation or CPR), which provides independent third-party certification of product conformity.   Supplied in 25kg paper bags.   Applications: Concreting in boreholes Concrete backfill Grouting - [Wellscreen & Casing](https://mitssolutions.asia/products/geosense/drilling-supplies/wellscreen-casing/):   PVC wellscreen and casing is used widely within Geotechnical instrumentation for the construction of monitoring, observation wells and standpipe piezometers.   Manufactured from high grade certified tough durable PVC using the latest extrusion, slotting and threading technology to provide easy to install systems.   A range of accessories including support clamps, lifting adaptors and centralisers are also available. - [Bentonite Powder](https://mitssolutions.asia/products/geosense/drilling-supplies/bentonite-powder/):   Bentonite Powder is a high-quality premium grade powder produced to OCMA standard. It is specially formulated to provide rapid development of viscosity and gel strength for drilling and civil engineering applications.   When mixed with water Bentonite Powder swells to many times its volume and rapidly forms a thixotropic gel.   Applications: Borehole sealing Landfill gas well sealing Grouting Isolating instrumentation and sampling - [Mikolit B Bentonite Pellets](https://mitssolutions.asia/products/geosense/drilling-supplies/mikolit-b-bentonite-pellets/):   Mikolit B® is a sealing pellet which requires no mixing or pumping. It is a patented clay-based pellet with a very low dust content. It is a high grade bentonite pellet manufactured from a mix of activated calcium bentonites to provide a high swelling capacity of 180-200%.   All Mikolit B® pellets have excellent sinking qualities and are easy to use.   SHELF LIFE: Unlimited if unopened & kept in a dry location; PACKAGING: 25kg waterproof bags, 42 bags per Europallet (disposable). 500 & 1000kg ‘Big Bags’ also available.   Applications: Borehole sealing Isolating instrumentation and sampling zones - [Grout Mix](https://mitssolutions.asia/products/geosense/drilling-supplies/grout-mix/):   Grout Mix is a pre-blended powder mixture of premium grade high quality sodium carbonate activated Bentonite powder and Ordinary Portland Cement (CEM 1) in a ratio of 2:1.   PACKAGING: 25kg paper bags, 40 bags per pallet.   Applications: Borehole sealing Grouting Isolating instrumentation and sampling zones - [Alucast Upright Covers](https://mitssolutions.asia/products/geosense/drilling-supplies/alucast-upright-covers/):   Alucast Upright Aluminium Security Covers provide lightweight water-resistant security and are particularly useful where easy location of the borehole is required, such as a field or where vegetation is likely to obscure the borehole location.   Manufactured in aluminium with a corrosion resistant coating, they make a convenient lightweight alternative to traditional heavy steel covers.   They are fitted with a simple hinged lid and secured with a heavy-duty padlock and are designed to be set into concrete the external lugs near the base provide a key into the concrete and prevent unauthorised removal. - [AntiFoam Dip Meter](https://mitssolutions.asia/products/geosense/environmental/evaporation-pan-2/):   The Anti-Foam Dip Meter has been designed to measure the leachate level within gas/leachate wells or sumps.   Its special shroud is unaffected by the presence of leachate foam found within wells, particularly where leachate is being pumped and/or positive gas extraction occurs, thus eliminating false readings. Once the float comes in contact with liquid (NOT FOAM) an audible buzz is heard, together with a visible red light.   Applications: Measuring leachate level within gas/leachate wells and sumps - [V-Notch Weirs and Tanks](https://mitssolutions.asia/products/geosense/flow-sensors/evaporation-pan/):   Geosense® V-Notch Weirs and Tanks are used to measure seepage water flows in open streams, channels or tanks and are used mainly as part of Dam Safety Monitoring programs.   Made from high quality stainless steel or other corrosion & abrasion resistant materials they are available in a wide range of sizes and angles to suit project requirements - [Staff Gauge](https://mitssolutions.asia/products/geosense/flow-sensors/staff-gauge/):   Staff Gauges are used mainly to measure the water levels in dam reservoirs or in combination with V-notch weirs to monitor seepage or entry flows as part of Dam Safety Monitoring programs.   Made from 150mm wide x 4mm thick lightweight glass reinforced plastic (GRP) they offer higher durability and longer life than products made from cast iron or other metals. - [Weir Monitor VWM-2000](https://mitssolutions.asia/products/geosense/flow-sensors/weir-monitor-vwm-2000/):   The Geosense® VWM-2000 vibrating wire precision water level monitor utilises a vented vibrating wire force transducer in combination with a cylindrical weight suspended from it to monitor water levels.   The vibrating wire transducer is vented to atmosphere so that any atmospheric changes are automatically compensated - [Thermistors](https://mitssolutions.asia/products/geosense/temperature-geosense/thermistors/): Thermistors provide accurate and reliable long-term temperature measurements and are used widely in the extremely harsh environments found within Geotechnical monitoring. They are available in two types: Probe A single point sensor mounted within a PVC or stainless steel housing which is attached to a cable length. String A series of sensors mounted along a multi-core cable which provide a temperature profile and is manufactured to customer requirements in terms of the number and spacing of each sensor. - [Resistance Temperature Detector(RTD) Pt100](https://mitssolutions.asia/products/geosense/temperature-geosense/resistance-temperature-detectorrtd-pt100/):   The Pt100 temperature sensor contains a platinum resistance thermometer that changes resistance value as its temperature changes and provides accurate and reliable long-term temperature measurements. These sensors are often used in the extremely harsh environments found within Geotechnical monitoring.   The platinum element is housed inside a rugged enclosure and sealed with a special sealing material to ensure efficient thermal distribution and has IP68 waterproofing.   The principle of operation is to measure the resistance of a platinum element and in accordance with EN/IEC 60751:2022. - [VW Temperature Sensor VWTS-6000](https://mitssolutions.asia/products/geosense/temperature-geosense/vw-temperature-sensor-vwts-6000/):   The VWTS 6000 vibrating wire temperature sensor is used primarily for the measurement of internal temperature in concrete structures, soil, rock or water.   The sensor operates on the principle that when plucked, a tensioned wire vibrates at its resonant frequency. The square of this frequency is proportional to the strain in the wire.   Around the wire is a magnetic coil which when pulsed by a vibrating wire readout or data logger interface plucks the wire and measures the resultant resonant frequency of vibration. - [Geo-Axiom Vista](https://mitssolutions.asia/products/geosense/software-geosense/geo-axiom-vista/):   GeoAxiom Vista is a specialist Geotechnical software which provides data handling, storage, visualisation, alarms, reporting and web based access from any size of automatic data acquisition system.   For the visualisation and presentation of data from: Vibrating wire sensors 4-20 mA sensors mV sensors Inclinometers Robotic Total Stations Manual readings GPS stations Webcam - [sensemetrics](https://mitssolutions.asia/products/geosense/software-geosense/sensemetrics/):   sensemetrics is a proven plug-and-play sensor management solution that simplifies sensor data capture and provides standardisation that will enhance connected real-time data visualisation and intelligence platforms. Any Geosense analogue or digital sensor can be connected to sensemetrics’ intelligent IIoT device (the Thread), which dynamically creates edge network connectivity and securely transfers data to the cloud.   Additional Geosense products such as SmartMux, Portable Inclinometer and Linx Logger provide expanded connectivity to the system - [Site Master Software](https://mitssolutions.asia/products/geosense/software-geosense/site-master-software/):   SiteMaster is a powerful inclinometer processing and presentation software program. It can process and present all inclinometers within a project, as well as include plan view displacement graphs related to excavation construction history.   It can work with any inclinometer system that produces a text data file. Monitoring sites are stored in an easy to modify folder where all data items are placed in a systematic approach. Displacement graphs are organised in an efficient and easy way. Reports can be customised and exported in PDF or MS Word format. [comment]: # (Generated by Hostinger Tools Plugin)