PCB Accessories

Enquiry
Category:

Milling Bit

Milling bit with 60° tip angle For making channel widths of 4 – 8 mil (0.1
– 0.2 mm)
Milling bit with 90° tip angle For making channel widths of 8 – 20 mil
(0.2 – 0.5 mm)
Milling bit with 120° tip angle For making channel widths of 16 mil (0.4
mm) or more
Diamond milling bit (90°) About 30 times longer lifespan

HF Milling Bit

High-Frequency (HF) Milling Bit (Radio-Frequency (RF) Milling Bit)


 

4mil ( 0.1mm) or less
6mil ( 0.15mm)
Since this size breaks easily, we recommend
using it on boards with copper plating of 18µm or
less in thickness and a spindle motor speed higher than
50,000 rpm, and milling speed slower.
8mil (0.2mm) Wherever possible, use this size on boards
with copper plating of 18 µm or less in thickness
and at slower than normal milling speeds.
12mil (0.3mm) Wherever possible, use this size on boards
with copper plating of 18 µm or less in thickness.
20mil ( 0.5mm) This size can be used under normal operating
conditions.

 
 

Advantages
  • Good high-frequency characteristics
  • Channel width does not change with milling depth

 

Disadvantage
  • Thin cutters break easily

Drilling Bit

Drilling Bit (For making holes)
0.02″, 0.078″ – 0.59″
(0.05, 0.2 – 1.5mm)
We have these sizes in 0.1 mm increments
in stock.
0.33″ ( 0.85mm) In stock
0.63″ – 1/8″
(1.6 – 3.175mm)
We have these sizes in 0.2 mm increments
in stock.

 
 

Routing Bit (For making external and internal shapes)

Sizes 1.0, 2.0, and 3.0 mm.
 
 

Aluminium Bit (For making external and internal shapes)

Especially suited for making external shapes of Teflon boards.
Sizes 0.8, 1.0, 2.0, and 3.0 mm.

Ring Setter

Ring Setter (simplified model) Base

With this ring setter, a ring is installed to a tool by hitting with a hammer.
 

 
Ring setter (simplified model) Base enables you to attach the ring on the tools precisely in the same position.
 

 
 

Features
  • You can attach or detach the ring to the tools.
  • Standardize the depth of the tools for the auto tool
    change machine.
  • Effective in adjusting to the material of varied thickness.
  • Available for the tools thinner than 0.1mm (4mil)
Engineering, Consultancy, and Solutions Provider
Malaysia
Vietnam
FOLLOW US
Malaysia
Vietnam
Engineering, Consultancy, and Solutions Provider

Copyright © – 2023 mitssolutions.asia
Website Design Malaysia