Model DU are general purpose dual-element transducers with side-mounted Microdot connectors. Replaceable/interchangeable delay lines and cross-talk barriers greatly extend versatility, cost-effectiveness, service life and can be contoured to fit I.D. or O.D. curved surfaces.
Dual-element contacts are longitudinal-wave (straight beam) transducers designed for near-surface and thin range flaw detection and thickness measurement. Two elements, one transmitter and one receiver, are mounted at an included (roof) angle to improve signals-to-noise ratio and optimize near-surface resolution.
*GP Series – General Purpose series of transducers are recommended for most applications and have a good trade-off between sensitivity and resolution. They have a medium frequency bandwidth of 40-65% at -6db but with more ring-down cycles in the
| Frequency (MHz) | Element Dimensions | Part Number | |||
|---|---|---|---|---|---|
| inch | mm | GP* | Delay Set | Accessories | |
| 2.25 | 0.5 x 0.5 | 12.7 x 12.7 | 00-012322 | 01-010740 | Dual Cable |
| 0.5 x 1 | 12.7 x 25.4 | 00-012323 | 01-010741 | MD – BNC | |
| 5 | 0.5 x 0.5 | 12.7 x 12.7 | 00-010487 | 01-010740 | 6-ft (1.83 m ) |
| 0.5 x 1 | 12.7 x 25.4 | 00-010584 | 01-010741 | 07-010012 | |
* GP = General Purpose; See Technology and Features for technical details.
| Element Dimensions | A | B | C | ||||
|---|---|---|---|---|---|---|---|
| inch | mm | ||||||
| 0.5 x 0.5 | 12.7 x 12.7 | 0.89 in. | 22.6 mm | 0.92 in. | 23.4 mm | 0.78 in. | 19.8 mm |
| 0.5 x 1 | 12.7 x 25.4 | 1.39 in. | 35.3 mm | 0.92 in. | 23.4 mm | 0.78 in. | 19.8 mm |
Copyright © – 2023 mitssolutions.asia
Website Design Malaysia
