Features

• CONVENIENT & CONSISTENT DATA COLLECTION
  Once installed, thickness data can be taken and collected as frequently as required from a safe and convenient access point.
   

• CORROSION RATE MONITORING
  matPIMS provide resolution to 0.001″ (0.025mm) and highly repeatable readings.
   

• MONITORING LOW SPOTS
  Can be used for post-NDE screening of pits to monitor remaining thickness and asset useful life.
   

• BURIED PIPE AND SLURRY LINES
  Installation of matPIMS on buried pipelines allows for convenient data collection without the need for frequent expensive digs.
   

• MONITORING KNOWN CRITICAL AREAS
  matPIMS area monitors cover a larger range at critical locations. 1×15 Linear = 7″ (178mm) 3×5 Matrix = 2×1.25″ (51x32mm)
   

• REDUCING COSTS
  Reduced costs by providing consistent thickness data without the need for manual inspection methods in difficult areas to reach.