Thermistors provide accurate and reliable long-term temperature measurements and are used widely in the extremely harsh environments found within Geotechnical monitoring.

They are available in two types:

  • Probe
    A single point sensor mounted within a PVC or stainless steel housing which is attached to a cable length.
  • String
    A series of sensors mounted along a multi-core cable which provide a temperature profile and is manufactured to customer requirements in terms of the number and spacing of each sensor.


The NTC (negative temperature coefficient ) thermistor sensor has a resistance that decreases with increasing temperature and with a coefficient >4%/ºC allows it to detect very small changes in temperature. They have a non-linear output that is represented by the Steinhart–Hart equation.

T= (1 / (A + B (LnR) + C(LnR) 3)) –273.2

Where: T = Temperature in degrees Centigrade

LnR= Natural log of Thermistor resistance in ohms

Readings can be made with a wide range of readout units including the VW2106 and the MP12 which display the reading directly in engineering units (degrees Celsius) or by an ohmmeter in combination with look-up tables. Readings can also be automated using an automatic data acquisition unit.

Technical Specifications

Temperature Range −50 to +150°C
Accuracy ±0.2 ºC
Resolution 0.1ºC


Thermistors Manual

Thermistors Datasheet

Engineering, Consultancy, and Solutions Provider
Engineering, Consultancy, and Solutions Provider

Copyright © – 2023
Website Design Malaysia