HD2124.1: Manometer – Thermometer – 2 Inputs


 
Manometer-Thermometer with two inputs for SICRAM module PP471 to connect probes TP704 and TP705 series.
 
Handheld manometer-thermometer with two inputs and LCD display. It performs measure of absolute, relative, differential pressure and temperature.
 
In order to measure the pressure you use the electronic module PP471 that works as an interface between the instrument and Delta OHM probes series TP704 and TP705.
 
Temperature is measured by means of Pt100 with SICRAM module or direct 4 wires Pt100 probes for immersion, penetration, contact or air. Measuring range -200 °C…+650 °C. Temperature probes are equipped with SICRAM module and factory calibration data are stored inside. Storage of maximum, minimum, average value and the difference between the two inputs. Output RS232 C for data transfer in real time to a PC or printer.
 
Complete with carrying case, instruction manual, 4 batteries, and Software DeltaLog9. The SICRAM module PP471, pressure probes, temperature probes and cables for downloading have to be ordered separately.
 
TP704 and TP705 series pressure probes and TP47… series temperature probes are suitable.
 
The instruments have IP66 protection degree.
 
Available as well in version with data logging function HD2124.2

Enquiry
Category: Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Descriptions

The HD2124.1 and HD2124.2 are portable instruments with a large LCD display. They perform measurements of absolute, relative and differential pressure, and temperature.
 
The PP471 electronic module is used to measure the pressure. The PP471 electronic module works as an interface between the instrument and the TP704 and TP705 series Delta Ohm probes.
 
The temperature is detected with immersion, penetration, contact or air Pt100 probe with SICRAM module or 4-wire Pt100 probe.
 
The temperature probes are fitted with SICRAM module and the factory calibration settings are already memorized inside. Upon turning on the instrument automatically detects them. The HD2124.2 instrument is a datalogger. It memorizes up to 32,000 samples that can be transferred from the instrument connected to a PC via the RS232C serial port or USB 2.0 port. The memorization interval, printing, and baud rate can be configured using the menu. The HD2124.1 and HD2124.2 models are fitted with an RS232C serial port and can transfer the acquired measurements in real time to a PC or to a portable printer.
 
The Max, Min and Avg function calculate the maximum, minimum or average values, the Peak function detects the presence of pressure peaks, the A-B function calculates the difference of the pressures or temperatures measured by the two inputs A and B.
 
Other functions include: the relative measurement REL, the HOLD function, and the automatic turning off that can also be disabled.

Downloads

HD2124.1: Manometer – Thermometer – 2 Inputs Manual
 
HD2124.1: Manometer – Thermometer – 2 Inputs Datasheet

Engineering, Consultancy, and Solutions Provider
Malaysia
Vietnam
FOLLOW US
Malaysia
Vietnam
Engineering, Consultancy, and Solutions Provider

Copyright © – 2023 mitssolutions.asia
Website Design Malaysia