RL-A200 is an easy-to-use class-D power amplifier designed to work with electrodynamic shakers in the lab or in production. The nominal output power of the amplifier is200 VA.
RL-A200 distinguished high efficiency, accuracy and low THD of the output signal. Among other advantages are light weight and compact case.
The amplifier has a smart protection system, which monitors the main parameters of the device, to prevent failures and equipment damage. In case it detects overheat, overcurrent, short circuit or deviation of any other parameters, the amplifier switches off the output stage.
The output signal attenuator on the front panel of the amplifier enables manual gain control from 0 to 100%.
The embedded LCD of the device displays the main parameters: the output current and voltage, temperature and other information about the state of the system.
| THD | ≤ 0.1 % |
|---|---|
| Signal-to-noise ratio | > 90 dB |
| Frequency range | 2÷20000 Hz |
|---|---|
| Output power | 200 VA |
| Maximum output voltage (RMS) | 30 V |
| Maximum output current (RMS) | 10 A |
| Dimensions | 390×80×282 mm |
|---|---|
| Weight | 3.1 kg |
| Power supply | 230 V |
| Load impedance | 2.5 – 8 Ohm |
Check the connection of Ethernet cable to the device and PC. Check if the device is loading. The words “RL-C21” should appear on the screen, and if you hold the “Stop” button for more than 3 seconds, it will display the information about the IP-address, serial number and the subnet mask. Another thing to check in case TestUp does not see the device is whether Windows Firewall is enabled and whether there is an antivirus installed. They should be disabled.
Copyright © – 2023 mitssolutions.asia
Website Design Malaysia
